#Shark sewing machine manual 384 how to#
How To Thread A Shark Euro Pro X Sewing Machine Pull six inches of both threads underneath the presser foot of the Euro Pro sewing machine.With the bobbin thread caught in a loop by the upper thread, pull the latter towards you.Draw the upper thread up to form a loop with the bobbin thread.Hold the upper thread and turn the handwheel with your other hand to raise the needle to the highest level.You also want to check the direction of the thread when you inserted the bobbin since the thread must run clockwise Step 3.If you find it hard to remove or insert the bobbin, check if the needle is raised to the highest position.Removes the bobbin, and cut the thread.Check if the thread’s tail comes from the top of the bobbin.Install the bobbin into the sewing machine.Find the hole in the bobbin and pull the end of the thread through it.Draw the thread through the bobbin winder tension disk front to back.Turn the clutch knob to release the clutch.Thread the needle front to back and leave four inches of thread behind it Step 2.
After the guides, draw the thread into the needle bar thread guide to reach the needle eye.There are guides that you’ll use for the thread to ensure that the machine will sew properly.Thread the upper thread according to the sequence shown in the Euro Pro model’s manual.Lift the needle bar to the highest position.Check if you turned off the sewing machine.Conclusion Euro Pro Sewing Machine: How To Thread.How Do You Thread A Universal Sewing Machine?.
0 kommentar(er)
